TTI Fiber Communication Tech. Co., Ltd.
Choose TTI, Light Your Internet Time!
Add to Cart
GYFTY 4 16 32 48 Core Fiber Cable Outdoor Aerial FRP Strength Member
GYFTY Outdoor Aerial FRP Strength Member 4/16/32/48 Core Optical Fiber Cable GYFTY
1. Specification:
The fibers, 250μ m, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A Fiber Reinforced Plastic (FRP) locates in the center of core as a non-metallic strength member. The tubes (and fillers) are stranded around the strength member into a compact and circular core. After the cable core is filled with the filling compound to protect it from water ingress, the cable is completed with a PE sheath.
| G652D | G655 | 50/125μm | 62.5/125μm | ||
| Attenuation(+20deg C) | @850nm | ≤ 3.0dB/KM | ≤ 3.0 dB/KM | ||
| @1300nm | ≤ 1.0dB/KM | ≤ 1.0 dB/KM | |||
| @1310nm | ≤ 0.36 dB/KM | -- | |||
| @1550nm | ≤ 0.22 dB/KM | ≤0.23dB/km | |||
| Bandwidth(Class A) | @850nm | ≥ 500 MHz-KM | ≥200 MHz-KM | ||
| @1300nm | ≥1000 MHz-KM | ≥600 MHz-KM | |||
| Numerical Aperture | 0.200±0.015NA | 0.275±0.015NA | |||
| Cable Cut-off Wavelength λcc | ≤1260nm | ||||
2. Feature:
Outdoor fiber optic cable with loose tube constructions are built to withstand adverse environments and provide the maximum fiber protection. These cables perform exceptionally well in wet conditions and during extreme temperature cycles.
They can be installed in ducts, direct buried and aerial/lashed, providing the flexibility needed to meet the demands of campus backbones and other outside plant requirements.
we manufactures a wide range of cables from 2–144fibers with a variety of designs to meet the demands of most installation conditions.Only the highest quality materials are used in our fiber optic cables to ensure that the cable strength and optical integrity are not compromised. Rugged jacket materials and the addition of armor provide the right level of protection.
| Fiber Count | 8-30 | 32-60 | 62-72 | 74-96 | 98-120 | 122-144 | |||||
| Diameter of Self support member (Steel wire) | 7x0.9, 7x1.0, 7x1.2, 7x1.4 , 7x1.6 | ||||||||||
| Diameter of Loose tube(mm) | 1.8 | 2.1 | 2.1 | 2.1 | 2.1 | 2.1 | |||||
| Diameter of Cable(mm) | 8.1 | 8.7 | 9.3 | 10.6 | 11.9 | 13.4 | |||||
| Gross weight(Kg/Km) | — | — | — | — | — | — | |||||
| Min. bending radius | Static 10xD Dynamic 20xD | ||||||||||
| Diameter of Self support member (Steel strand wire) mm | 7x0.9mm | 7x1.0mm | 7x1.2mm | 7x1.4mm | 7x1.6mm | ||||||
| Max. tensile force, N Short term | 3000 | 4000 | 6000 | 8000 | 12000 | ||||||
| Max. tensile force, N Long term | 1000 | 1500 | 2000 | 3000 | 5000 | ||||||
| Max Crush Resistance(N/100mm) | Short term 1000N | ||||||||||
|
| Long term 300 N | ||||||||||
| Allowable Temperatures | operation | -40°C – +60°C | |||||||||
|
| storage | -50°C – +70°C | |||||||||
|
| install. | -20°C – +50°C | |||||||||
3. Application:
4. Technical Parameters:
| No. | Items | Unit | Specification | |
| G.652D | ||||
| 1 | Mode Field Diameter | 1310mm | μm | 9.2+-0.4 |
| 1550mm | μm | 10.4+-0.5 | ||
| 2 | Cladding Diameter | μm | 10.4+-0.5 | |
| 3 | Cladding Non-Circularity | % | <=10 | |
| 4 | Core-Cladding Concentricity Error | μm | <=0.6 | |
| 5 | Coating Diameter | μm | 245+-7 | |
| 6 | Coating Non-Circularity | % | <=6.0 | |
| 7 | Cladding-Coating Concentricity Error | μm | <=12.0 | |
| 8 | Cable Cutoff Wavelength | nm | λcc≤1260 | |
| 9 | Attenuation(max.) | 1310mm | dB/km | <=0.36 |
| 1550mm | dB/km | <=0.22 | ||
Cable Parameters
| Items | Specification | |
| Fiber Count | 24 | |
| Colored Coating Fiber | Dimension | 250+-15μm |
| Color | Blue,Orange Blue&Brown,Gray,White,Red,Black,Yellow Violet,Pink,Aqua. | |
| Loose Tube | Dimension | 2.7+-0.1mm |
| Material | PBT | |
| Color | Natural | |
| Strength Member | Dimension | 2.0mm |
| Material | FRP | |
| Color | Natural | |
| Outer Jacket | Dimension | (8.5+-0.3)mmx(4.5+-0.2)mm |
| Material | PE | |
| Color | Black | |
Mechanical and environmental Characteristics
| Items | Unite | Specification |
| Tension(Long Term) | N | 600 |
| Tension(Short Term) | N | 1500 |
| Crush(Long Term) | N/10cm | 1000 |
| Crush(Short Term) | N/10cm | 2000 |
| Installation Temperature | ℃ | -20~+60 |
| Operating Temperature | ℃ | -40~+70 |
| Storage Temperature | ℃ | -40~+70 |
5. Product Picture:
6. FAQ:
1. Why choose TTI FIBER ?
(1)Professional manufacturer: Low MOQ, free samples are available.
(2)Quality assurance:Stable high quality.
(3)Customers solutions:Quick.
(4)Win-Win Price:Save much costs, bring more benefits for customers.
2. Do you accept OEM,ODM?
Yes, we accept them .
3. Can you print our LOGO?
Sure, Your LOGO can be printed on the boxes , or products.
4. What's the method of shipment?
We accept all shipment , such as Delievery,ocean transport, land transport , airport transport.
5. What's the Payment?
We accept all payments , such as LC,TT,DP,DA,Paypal,,Money Gram.